David Walters Yachts
GET IN TOUCH WITH A BROKER
DAMSELFLY - SEAWIND 1370 - A PERFECT BALANCE OF PERFORMANCE AND LIFSTYLE
Light and nimble through meticulous design and advanced, lightweight construction – but crucially, capable of being heavily loaded with the minimum of impact on performance, this cruising catamaran brings about a generational step forward in catamaran. The 1370 is built to a well-defined balance of sea handling performance and live aboard comfort demand by modern cruising sailors.
call for try before you buy charter.
SEAWIND 1370 (13.7 METERS / 45 FT)
STANDARD SPECIFICATIONS AND EQUIPMENT – OWNERS 3 Cabin Version
GENERAL: The overall finish of the Seawind 1370 will be consistent with a luxury world-standard yacht of this size and type. Only very high-quality equipment is used throughout. The overall aim is for a level of construction, workmanship, equipment, tout and style that surpasses any other comparable catamaran available in the market at this size range.
EXTERIOR / LAMINATE: Finish: Full female molded hulls & decks, exterior gelcoat finish with molded-in non-slip surface on deck areas. Laminates:
Hull Laminate: Vinyl Ester (Modied epoxy) resin infusion laminate of the entire hull laminate. PVC Foam cored construction using a hybrid of e-glass and carbon fiber reinforcement.
Deck Laminate: Vinyl Ester (Modied epoxy) resin infusion laminate of the entire deck laminate. PVC foam cored construction using a hybrid of e-glass and carbon fiber reinforcement.
Other Components: all other components shall be made using Polyester resin, vacuum formed or infused with a hybrid of e-glass and carbon fiber reinforcement over PVC foam cores.
Laminate specifications are to Australian survey compliant and international standards including European CE certification.
MAST/BOOM/SAILS:
- Clear anodized aluminum mast and boom. Double Spreader, fractional rig
- Standing Rigging: All fitted with turnbuckles and T-ball end fittings
- Forestay 3/8 (10mm) 1 x 19 Dieform wire
- Side stays 3/8 (10mm) 1 x 19 Dieform wire
- Diamonds 5/16 (8mm) 1 x 19 Dieform wire
- Main halyard: 12 mm Spectra rope: Heavy duty shackle
- Genoa halyard: 8 mm Spectra rope. Heavy duty shackle
- Topping lift: 10 mm double braid, Heavy duty shackle
- Spinnaker Halyard: 12mm double braid with snap-shackle spliced to end
- Screecher Halyard: 10mm Spectra rope: 2:1 purchase with heavy duty block
- Boom outhaul
- 3 x mainsail single line reefing fitted
- Main halyard, topping lift and reefing lines to be led back to cockpit through turning blocks and rope clutches
- Fully battened mainsail – Fiberglass sail battens
- Mast adjustable ball bearing batten car
- Cruising mainsail cover with integrated lazy jack system
- Self-tacking headsail
- Curved headsail traveller track with end stops
- Control sheet to cockpit
- Headsail furler
DECK EQUIPMENT:
- Flush mounted deck hatches (8 in total)
4 x Forward Hatches 470mm x 470mm
2 x Mid cabin side hatches 507mm x 377mm
1 x Port Bathroom window hatch 507mm x 377mm
1 x Aft Cabin window hatch 507mm x 377mm
- Fiberglass Deck Hatches (8 total):
Cockpit storage hatches x 2
Forward anchor & storage hatches x 5
Cockpit Icebox & hatch x 1
- 6 x Docking cleats. Each side: bow, stern & amidships
- 1 x Heavy duty mooring cleat on forward walkway
- Ventilation: 2 x forward cabin hatch vents
- Mast base turning blocks
- Main halyard, reefs & sail controls led to cockpit
- 15 x Rope clutches
- Manual Sheet winches:
2 x 46ST – 2 speed self-tailing
2 x 40ST – 2 speed self-tailing
- Stanchions/Rails: High quality stanchions, bow rails and stern rails with 3 lifelines 700mm high surpassing international CE requirements
2 x transom access gates with pelican hook releases
2 x side access gates with pelican hook releases
- Aft swim ladder: folding stainless aft swim ladder
FORWARD BEAM, CATWALK AND TRAMPOLINES:
- Forward beam section 251 x 162mm
- Pelican striker and adjustable cable
- 2 x Anchor rollers under deck
- Permanent stowage position for anchor
- Structural longeron in PVC foam-sandwich fiberglass. Structural, and removable carbon fiber bowsprit. Code-0/Screecher takeoff built into longeron
- PVC coated open weave offshore trampolines
AFT BEAM AND DECK:
- Molded fiberglass Targa Bar with curved mainsheet track
- Offshore standard dinghy davits mounted to aft beam with 300kg working load
RUDDER SYSTEM:
- Twin, protected helm stations (dual)
2 X 32” composite steering wheels - Cable and tie rod linkage with both wheels independently linked to steering system – system offers back-up redundancy
INTERIOR FINISH:
- Luxury finish interior
Sides and cabin top lined with textured fabric, simulated timber laminates or molded gelcoat - Floors: Common area soles simulated timber
SALOON:
- Timber dining table: Lowers to create coffee table or double bed
- Upholstered settee with day lounge
- Cocktail cabinet/storage under day lounge
- Timber chart table
- Forward opening windows in 10mm toughened glass in marine anodized aluminum frame
- Side windows in 6mm toughened glass
- Saloon / cockpit doors: Molded gelcoat tri-fold doors. Complete with folding mechanism for folding into Targa walkway
GALLEY:
- Spacious galley with coordinated Polystone counter surfaces, timber accents
- Three (3) burner LPG stove with stainless steel potholders and flame failure device to shut off LPG immediately in event of flame going out
- Double bowl stainless steel sink
- Pressure hot & cold freshwater system with single lever mixing tap
- Refrigerator: Front opening upright fridge 130 liters
- Under bench storage with timber door fronts & cutlery drawers
- Inboard side of galley: Over-bench cupboard with sliding door fronts
- LPG solenoid control in galley
SLEEPING CABINS:
- Timber doors on all private cabins
- Port owners’ cabin: queen sized bed (2050mm x 1540mm)
- Starboard fwd. cabin: queen sized bed (2050mm x 1540mm)
- Aft Starboard cabin: double bed (1950mm x 1420mm)
- Mattresses to be 150mm (6”) quilted foam upholstered
- Cabins lined
- Recessed 12volt lighting
- Storage/Cupboards
- 1x 12V USB outlet in each cabin
PORT HEAD:
- Timber lockable door
- Electric toilet that discharges via holding tank.
- Holding tanks built in. Discharge Pump out by shore station or directly overboard through 130L holding tank
- Pipes, skin fittings and seacocks are easily accessible and to meet survey requirements
- Vanity basin with pressure hot & cold water
- Wall mounted shower head & mixer tap
- Electric shower bilge pump with direct overboard discharge
- Large quantity cupboards / shelves to very high quality
- Toilet roll holder, towel rack & mirror mounted
STARBOARD HEAD:
- Timber lockable door
- Electric toilet discharges via holding tank.
- Holding tank built in. Discharge Pump out by shore station or directly overboard
- Pipes, skin fittings and seacocks to be easily accessible and to meet survey requirements
- Vanity basin with pressure hot & cold water
- Shower head and basin mixer tap with electric shower bilge pump. Cupboard/shelves to very high quality
- Toilet roll holder, towel rack & mirror mounted
LIGHTING/ELECTRICAL SYSTEM:
- High quality DC electrical switch panel with circuit breakers, with LED indicator lights and voltage display
- Marine grade tinned electrical wiring with extensive use of heat-sealed connectors
- Batteries x 3 comprising House System (540-amp hrs.)
- 2 x 270-amp hr AGM (Absorbed Glass Matt) deep cycle / heavy duty batteries
- One engine cranking battery 130AH – 900 CCA AGM
- 230amp heavy duty isolation switch
- BEP Battery Monitor
- 12 V lighting: Numerous 12V LED interior lamps and courtesy lights throughout including recessed lights in cockpit. Dome lights in cockpit. (All lights are LED)
- 4 x 12V USB outlets
- Survey approved LED navigation lights. Port & Starboard mounted on bow rails
- Deck floodlight mounted on mast
- Mast head anchor / riding light
- 2x 160w Solar Panels and 40amp regulator
PLUMBING /FRESH WATER TANKS:
- Pressure hot & cold-water system:
Hot water storage system (40 liter / 8.8 gallons)
Hot & cold water to galley and both bathrooms
Galley freshwater tap is lever type
Fresh water tank: 600 liters (155 gallons)
Remote deck filler
Electric freshwater pump
- Electric bilge pumps (2) with controls integral with master battery switch panel
Float Switches (2)
Manual bilge pumps (2) in each hull
- Marelon through-hull fittings to CE international standard
- Electric toilets in each head
- Port and Starboard bathroom with separate shower stall
Electric sump pump for shower drain
- 2 x LPG bottles – 4.5kg galvanized
- Fresh water tank gauge
ENGINES:
- Twin Yanmar 40hp sail drive diesel engines. Fresh water cooling, rubber isolation mounts on reinforced fiberglass bed with integral oil drip pan
- Three bladed fixed propellers
- Fuel tanks: Total 600 liters (155 gallons) in two CE approved pressure tested roto-molded tanks. Fuel gauges fitted
- Water intakes for engines protected by external strainer (1 per engine)
Primary Racor water separator / fuel filters
secondary engine fuel filters
- Engine, fuel tank & fuel line installation to CE standards
- Console mounted engine instruments with electric tachometers, engine monitoring / warning systems, and engine hour meters
NAVIGATION:
- Steering compass
- DSC VHF radio
ANCHORING /MOORING:
- Electric anchor winch with chain & gypsy located under locker to give clean deck
- Primary anchor is 55 lb. Delta type with 55 meters x 10mm short link galvanized chain
Primary anchor is stored in a specially designed anchor roller under the forward beam - Anchor winch has foot switch at the winch plus a remote up / down control at the helm station
- 4 x PVC Inflatable Fenders
- 4 x Mooring lines (each 15 meters x 14mm)
ANTIFOULING / STRIPING:
- Epoxy barrier coat plus 2 coats of high-quality Altex antifouling bottom paint
- Seawind 1370 decals on each hull and stern
DISCLAIMER: The Specifications above may change at Seawind Catamaran’s discretion
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
SEAWIND 1370 (13.7 METERS / 45 FT)
STANDARD SPECIFICATIONS AND EQUIPMENT – OWNERS 3 Cabin Version
GENERAL: The overall finish of the Seawind 1370 will be consistent with a luxury world-standard yacht of this size and type. Only very high-quality equipment is used throughout. The overall aim is for a level of construction, workmanship, equipment, tout and style that surpasses any other comparable catamaran available in the market at this size range.
EXTERIOR / LAMINATE: Finish: Full female molded hulls & decks, exterior gelcoat finish with molded-in non-slip surface on deck areas. Laminates:
Hull Laminate: Vinyl Ester (Modied epoxy) resin infusion laminate of the entire hull laminate. PVC Foam cored construction using a hybrid of e-glass and carbon fiber reinforcement.
Deck Laminate: Vinyl Ester (Modied epoxy) resin infusion laminate of the entire deck laminate. PVC foam cored construction using a hybrid of e-glass and carbon fiber reinforcement.
Other Components: all other components shall be made using Polyester resin, vacuum formed or infused with a hybrid of e-glass and carbon fiber reinforcement over PVC foam cores.
Laminate specifications are to Australian survey compliant and international standards including European CE certification.
MAST/BOOM/SAILS:
- Clear anodized aluminum mast and boom. Double Spreader, fractional rig
- Standing Rigging: All fitted with turnbuckles and T-ball end fittings
- Forestay 3/8 (10mm) 1 x 19 Dieform wire
- Side stays 3/8 (10mm) 1 x 19 Dieform wire
- Diamonds 5/16 (8mm) 1 x 19 Dieform wire
- Main halyard: 12 mm Spectra rope: Heavy duty shackle
- Genoa halyard: 8 mm Spectra rope. Heavy duty shackle
- Topping lift: 10 mm double braid, Heavy duty shackle
- Spinnaker Halyard: 12mm double braid with snap-shackle spliced to end
- Screecher Halyard: 10mm Spectra rope: 2:1 purchase with heavy duty block
- Boom outhaul
- 3 x mainsail single line reefing fitted
- Main halyard, topping lift and reefing lines to be led back to cockpit through turning blocks and rope clutches
- Fully battened mainsail – Fiberglass sail battens
- Mast adjustable ball bearing batten car
- Cruising mainsail cover with integrated lazy jack system
- Self-tacking headsail
- Curved headsail traveller track with end stops
- Control sheet to cockpit
- Headsail furler
DECK EQUIPMENT:
- Flush mounted deck hatches (8 in total)
4 x Forward Hatches 470mm x 470mm
2 x Mid cabin side hatches 507mm x 377mm
1 x Port Bathroom window hatch 507mm x 377mm
1 x Aft Cabin window hatch 507mm x 377mm
- Fiberglass Deck Hatches (8 total):
Cockpit storage hatches x 2
Forward anchor & storage hatches x 5
Cockpit Icebox & hatch x 1
- 6 x Docking cleats. Each side: bow, stern & amidships
- 1 x Heavy duty mooring cleat on forward walkway
- Ventilation: 2 x forward cabin hatch vents
- Mast base turning blocks
- Main halyard, reefs & sail controls led to cockpit
- 15 x Rope clutches
- Manual Sheet winches:
2 x 46ST – 2 speed self-tailing
2 x 40ST – 2 speed self-tailing
- Stanchions/Rails: High quality stanchions, bow rails and stern rails with 3 lifelines 700mm high surpassing international CE requirements
2 x transom access gates with pelican hook releases
2 x side access gates with pelican hook releases
- Aft swim ladder: folding stainless aft swim ladder
FORWARD BEAM, CATWALK AND TRAMPOLINES:
- Forward beam section 251 x 162mm
- Pelican striker and adjustable cable
- 2 x Anchor rollers under deck
- Permanent stowage position for anchor
- Structural longeron in PVC foam-sandwich fiberglass. Structural, and removable carbon fiber bowsprit. Code-0/Screecher takeoff built into longeron
- PVC coated open weave offshore trampolines
AFT BEAM AND DECK:
- Molded fiberglass Targa Bar with curved mainsheet track
- Offshore standard dinghy davits mounted to aft beam with 300kg working load
RUDDER SYSTEM:
- Twin, protected helm stations (dual)
2 X 32” composite steering wheels - Cable and tie rod linkage with both wheels independently linked to steering system – system offers back-up redundancy
INTERIOR FINISH:
- Luxury finish interior
Sides and cabin top lined with textured fabric, simulated timber laminates or molded gelcoat - Floors: Common area soles simulated timber
SALOON:
- Timber dining table: Lowers to create coffee table or double bed
- Upholstered settee with day lounge
- Cocktail cabinet/storage under day lounge
- Timber chart table
- Forward opening windows in 10mm toughened glass in marine anodized aluminum frame
- Side windows in 6mm toughened glass
- Saloon / cockpit doors: Molded gelcoat tri-fold doors. Complete with folding mechanism for folding into Targa walkway
GALLEY:
- Spacious galley with coordinated Polystone counter surfaces, timber accents
- Three (3) burner LPG stove with stainless steel potholders and flame failure device to shut off LPG immediately in event of flame going out
- Double bowl stainless steel sink
- Pressure hot & cold freshwater system with single lever mixing tap
- Refrigerator: Front opening upright fridge 130 liters
- Under bench storage with timber door fronts & cutlery drawers
- Inboard side of galley: Over-bench cupboard with sliding door fronts
- LPG solenoid control in galley
SLEEPING CABINS:
- Timber doors on all private cabins
- Port owners’ cabin: queen sized bed (2050mm x 1540mm)
- Starboard fwd. cabin: queen sized bed (2050mm x 1540mm)
- Aft Starboard cabin: double bed (1950mm x 1420mm)
- Mattresses to be 150mm (6”) quilted foam upholstered
- Cabins lined
- Recessed 12volt lighting
- Storage/Cupboards
- 1x 12V USB outlet in each cabin
PORT HEAD:
- Timber lockable door
- Electric toilet that discharges via holding tank.
- Holding tanks built in. Discharge Pump out by shore station or directly overboard through 130L holding tank
- Pipes, skin fittings and seacocks are easily accessible and to meet survey requirements
- Vanity basin with pressure hot & cold water
- Wall mounted shower head & mixer tap
- Electric shower bilge pump with direct overboard discharge
- Large quantity cupboards / shelves to very high quality
- Toilet roll holder, towel rack & mirror mounted
STARBOARD HEAD:
- Timber lockable door
- Electric toilet discharges via holding tank.
- Holding tank built in. Discharge Pump out by shore station or directly overboard
- Pipes, skin fittings and seacocks to be easily accessible and to meet survey requirements
- Vanity basin with pressure hot & cold water
- Shower head and basin mixer tap with electric shower bilge pump. Cupboard/shelves to very high quality
- Toilet roll holder, towel rack & mirror mounted
LIGHTING/ELECTRICAL SYSTEM:
- High quality DC electrical switch panel with circuit breakers, with LED indicator lights and voltage display
- Marine grade tinned electrical wiring with extensive use of heat-sealed connectors
- Batteries x 3 comprising House System (540-amp hrs.)
- 2 x 270-amp hr AGM (Absorbed Glass Matt) deep cycle / heavy duty batteries
- One engine cranking battery 130AH – 900 CCA AGM
- 230amp heavy duty isolation switch
- BEP Battery Monitor
- 12 V lighting: Numerous 12V LED interior lamps and courtesy lights throughout including recessed lights in cockpit. Dome lights in cockpit. (All lights are LED)
- 4 x 12V USB outlets
- Survey approved LED navigation lights. Port & Starboard mounted on bow rails
- Deck floodlight mounted on mast
- Mast head anchor / riding light
- 2x 160w Solar Panels and 40amp regulator
PLUMBING /FRESH WATER TANKS:
- Pressure hot & cold-water system:
Hot water storage system (40 liter / 8.8 gallons)
Hot & cold water to galley and both bathrooms
Galley freshwater tap is lever type
Fresh water tank: 600 liters (155 gallons)
Remote deck filler
Electric freshwater pump
- Electric bilge pumps (2) with controls integral with master battery switch panel
Float Switches (2)
Manual bilge pumps (2) in each hull
- Marelon through-hull fittings to CE international standard
- Electric toilets in each head
- Port and Starboard bathroom with separate shower stall
Electric sump pump for shower drain
- 2 x LPG bottles – 4.5kg galvanized
- Fresh water tank gauge
ENGINES:
- Twin Yanmar 40hp sail drive diesel engines. Fresh water cooling, rubber isolation mounts on reinforced fiberglass bed with integral oil drip pan
- Three bladed fixed propellers
- Fuel tanks: Total 600 liters (155 gallons) in two CE approved pressure tested roto-molded tanks. Fuel gauges fitted
- Water intakes for engines protected by external strainer (1 per engine)
Primary Racor water separator / fuel filters
secondary engine fuel filters
- Engine, fuel tank & fuel line installation to CE standards
- Console mounted engine instruments with electric tachometers, engine monitoring / warning systems, and engine hour meters
NAVIGATION:
- Steering compass
- DSC VHF radio
ANCHORING /MOORING:
- Electric anchor winch with chain & gypsy located under locker to give clean deck
- Primary anchor is 55 lb. Delta type with 55 meters x 10mm short link galvanized chain
Primary anchor is stored in a specially designed anchor roller under the forward beam - Anchor winch has foot switch at the winch plus a remote up / down control at the helm station
- 4 x PVC Inflatable Fenders
- 4 x Mooring lines (each 15 meters x 14mm)
ANTIFOULING / STRIPING:
- Epoxy barrier coat plus 2 coats of high-quality Altex antifouling bottom paint
- Seawind 1370 decals on each hull and stern
DISCLAIMER: The Specifications above may change at Seawind Catamaran’s discretion
Factory Upgrades / Options
ANCHORING:
PRIMARY ANCHOR UPGRADE TO 66LBS SARCA EXCEL
SECONDARY ANCHOR (FORTRESS FX-55, 15MX8MM CHAIN & 50M WARP)
ANCHOR CHAIN COUNTER
UPGRADE TO 90M OF 8MM HIGH TENSILE CHAIN
CARBON COACH ROOF
CARBON FIBER STEERING WHEEL UPGRADE
COCKPIT ICE MAKER
COCKPIT FREEZER
COCKPIT SIDE CLEARS
COCKPIT SIDE SHADE
COMFORT:
EXTERIOR SCREENS SALOON SHADE
Thermo Pro 120 Hydronic Heater System
FAN CAFRAMO SIROCCO
UPGRADE TO ELECTRIC MICROWAVE OVEN
WASTE CHUTE DIRECTLY TO SEA
SINGLE GALLEY SINK - CORIAN TOP
UPGRADE SALON TABLE & NAV DESK TOP TO MAPLE VENEER
SCREEN HATCH SKY - BLACKOUT/INSECT (1)
SCREENS CABIN BLINDS
SCREENS SALOON BLINDS
SCREENS BATHROOM BLINDS
INSECT SCREEN FOR FORWARD OPENING WINDOWS
UPGRADE TO 2 BURNER LPG WITH SINGLE INDUCTION BURNER (110V)
UPGRADE STARBOARD FORWARD WORKBENCH FIT OUT
AIR CONDITIONING SALOON & CABINS 32,000BTU (24V)
FLEXITEEK DECKING (COCKPIT & TRANSOM STEPS) - SCRUBBED WITH WHITE CAULK
FORWARD DECK LOUNGE CUSHION
ELECTRICAL:
BATTERY LITHIUM UPGRADE (400AH)
BATTERY LITHIUM UPGRADE ADDITIONAL (200AH)
INVERTER/CHARGER: 4500W/120AMP (110V) - ?? 1370-14-05 (220V)
ISOLATION TRANSFORMER 7KW (110V)
C-ZONE DIGITAL SWITCHING (DC)
LIGHT DIMMING BY CZONE
INTERIOR MOOD LIGHTING
UNDERWATER LIGHTS (2)
LED MEGA BEAM DECK LIGHT UPGRADE
LED HELLA STERN STERN MOUNTED FLOOD LGHT
LIGHTNING PROTECTION
ADDITIONAL 12V/24V USB-C TYPE OUTLET
ADDITIONAL USB-C TYPE OUTLET EXTERIOR
ADDITIONAL 12V OUTLET
GFCI GPO FOR AREAS NEAR WATER
SHORE POWER & DOUBLE GPO 3X 110V 60HZ INC GALVANIC BLOCKER
SHORE POWER ADDITIONAL GPO (110V & US TYPE OUTLET)
TRANSOM STEP LIGHT
WASHING MACHINE - DAEWOO MINI 3.5KG 240V
DUAL VOLTAGE CHARGING 110V
SOLAR PANEL UPGRADE TO 2310W & 2x MPPT CONTROLLER
ENGINES:
ROPE CUTTER - SHAFT SHARK
UPGRADE YANMAR 57HP ENGINES INCLUDED DUAL VC20 ELECTRICAL CONTROL
FUEL POLISHING SYSTEM
ENTERTAINMENT:
ADDITIONAL 2 X SPEAKERS AMPLIFIER & SUBWOOFER
STEREO/TV/DVD/CD 22"WIDE SCREEN LCD HD ENTERTAINMENT SYSTEM INC DIGITAL ANTENNA
UPGRADE TO 40" TV
EXTRAS:
GANGWAY (2.6M CARBON FOLDING W/ DECK FITTINGS STANCHIONS)
PREMIUM FENDER UPGRADE
PROPSPEED
Hailer (new 2026) $500 and attached to Vesper system
Camera on spreader (new 2026)
Cyclops system for standing rigging (new 2026)
8-man lift raft installed
Davit racks – to be mounted
Outfitted kitchen
Paddle Board
Asymmetrical spinnaker.
Medical / first add supplies on board
EPIRB
Handheld VHF radio
Toppers on three beds
Air flow venting material installed under three beds
Various hand tools and miscellaneous parts
Starlink on board
Transfer pump on board
Linens and bedding and pillows
Vacuum on board
LPG:
GAS DETECTOR
COOKOUT DELUXE GAS BBQ
NAVIGATION:
B&G NAVIGATION PACKAGE WITH 7" PLOTTER, TRIDATA AND AUTOPILOT
NAVIONICS+ CHART (select locations)
B&G ADDITIONAL AUTOPILOT CONTROL AT NAV DESK (STD ON PORT HELM)
B&G Additional 4.5" Multifunction Display
UPGRADE TO 12" ZEUS 3S CHART PLOTTER
B&G HALO20+ RADAR
B&G FORWARD SCAN
CHART PLOTTER REPEATER TO TV
MAST HEAD TRICOLOR NAV LIGHT
SATELLITE PHONE/DATA WIFI ROUTER IRIDIUM GO
UPGRADE TO VESPER CORTEX V1 (VHF & AIS) (INCL TETHERED HAND SET)
ADDITIONAL B&G 16" PLOTTER AT CHART TABLE (NAV DESK)
WIRELESS ROUTER KIT - NORTH AMERICA WITH LIMITED EURO AND ASIA
STARLINK CABLE TO AFT & BATTERY AREA
PLUMBING:
DECK WASH FRESHWATER (FOREDECK AND COCKPIT OUTLETS)
DECK WASH SALT WATER
SALTWATER DECK WASH ADDITIONAL OUTLET IN IN COCKPIT (FOR FISH CLEANING)
TRANSOM SHOWER (HOT & COLD)
WATERMAKER (SPECTRA NEWPORT inc Z-ION UNIT)
FRESH WATER HANDHELD BIDER SPRAYER (1)
FRESH WATER UV PURIFIER AT GALLEY WITH FAUCET
FRESH WATER PUMPS & PLUMBING ONLY INSTALLED FOR TOILETS
SAFETY:
DINGHY HIGHFIELD CL360BLT - HYPALON
DINGHY WHEELS
DINGHY OUTBOARD BRACKET AND MOTOR CRANE
ALLOY PLATE IN PORT INBOARD COAMINGS FOR FISHING GEAR
JACKLINE PAD EYES AND JACKLINES
LIFE RAFT STORAGE BOX
DROGUE ATTACHMENT POINTS
SAIL HARDWARE:
BOWSPRIT & DOWNWIND DECK FITTING KIT - CARBON FIBER
ELECTRIC MAINSHEET TRAVELER CONTROL
UPGRADE ALL HARKEN WINCHES (2 X ELECTRIC 50.2, 2 X MANUAL 50.2, 1 X MANUAL 46.2)
MAST HEAD WINDEX
MAST STEPS TO SPREADER
SYNTHETIC LIFELINES
CRUISING LAMINATE JIB UPGRADE
CRUISING LAMINATE MAIN UPGRADE
STORM JIB WITH FURLER, SHEET & HARDWARE
STAINLESS STEEL SCREECHER LINK PLATE AND FITTINGS (INCLUDING LINK PLATE, A PIN & SPLIT RING)
EXTRA WORK FOR CHAIN PLATE ACCESS
VESSEL MONITORING - SENTINEL MARINE - new option
SAILBAG/FABRICS:
SEAWIND 1370 LOGO STITCHED ONTO SAILBAG
SAILBAG COLOR - CAPTAIN NAVY
EXTERIOR CUSHION COLOR - PLATA
INTERIOR CUSHION COLOR - CARBON SKY
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
This listing is courtesy of the BoatWizard MLS and may be centrally listed with another broker. It is offered as a convenience by David Walters Yachts to its clients and is not intended to convey representation of a particular vessel.
Find Us
WORK WITH A PROFESSIONAL YOU CAN TRUST
Join The DWY Newsletter
SUBSCRIBE HERE
For the latest yachting news and exclusive updates from DWY