New to the market just in time for the fall boat show season.

Miss Maggie is a custom built Sabre 48SE, with a layout specifically designed for the ultimate couples cruising platform in mind.  Two time Sabre owners and built from the hull up with DiMillo's Yacht Sales and Sabre Yachts- Miss Maggie was thoughtfully outfitted to provide a larger main salon feel, more storage below for longer stays on board as well as a unique galley layout.  She was painted directly from the factory in Kingston Grey and the teak toe rail was removed from the build to provide a sleeker look with much less maintenance. This boat is used and taken care of regularly, but shes fast and makes berth in a place thats close to everything- The result 229 engine hours.  Other highlights include;

• Seakeeper 9
• Additional 120VAC shore power cord in anchor locker
• Custom Galley and Salon
• Painted Kingston Grey Hull

Miss Maggie lives at DiMillo's Yacht Sales office in Greenport, NY.  She is easy to show and get on board.  Video tours are available if needed. 

The 48 Salon Express has a traditional exterior profile that belies her contemporary performance. She cruises at 27 knots and, and at wide open throttle, she’ll attain more than 32 knots. Pod drives and joystick controls give every owner-operator the confidence to dock her in the most difficult of circumstances, and remarkably low sound levels while underway allow for a more pleasant experience while cruising.

Featuring a standard configuration of two cabins and two heads, the 48 Salon Express is supplemented by a utility space forward of the engine room that can be laid out as additional crew quarters. Designed with our customers in mind, her galley-down layout doesn’t compromise on space and light, making food and drink preparation a pure pleasure. Unique to the Sabre 48 design, her master berth and en-suite head have an athwartships orientation, allowing for flat cabin sole on all side of the spacious island queen.

Fiberglass

• Anti-skid color (fore and side decks, aft cockpit and recessed area of swim platform)

Exterior and Deck

• FRP molded mast and seperate radar platform for sedan hardtop
• Delete standard teak toe rails.  Install 9" Skene chocks to forward cleats.  Install 4 midship cleats on the molded cleat pads in the deck.  
• Custom cove stripe color (Silver)
• Custom Sureshade color (Oyster)

Mechanical

• SeaKeeper 9 installed in engine room
• Reverso oil change system
• Single seagull water purifier on galley cold water, plumed to separate spigot
• Single Seagull water purifier on optional icemaker
• Fresh water washdown forward

Electrical

• Stand alone 3000W inverter and separate 100A battery charger
• Second shorepower inlet at bow with 25 foot cord set
• Central vac system with two outlets and 32 foot expandable hose
• Kahlenberg dual chrome horns
• Add hydraulic lift to utility room hatch in main salon sole.  Install lift on the fwd end of the utility hatch so its out of the way as much as possible.  Install button at the helm
• Add 120V/USB 12V outlet in each end table on the port side settee
• Add a breaker for the hot water heater to the breaker panel in the companionway

Interior

• Galley-Guest Head-Master Head countertops done in Silver Birch
• Master head wall tile delete
• Master head and guest head tile 2"x2" Lt smoke speckled
• STIDD seat fabric- Ultraleather Ermine
• Main Salon fabric- Ultraleather Ermine with propeller accent stripe
• Cockpit fabric-Sunbrella Dupoine shade
• Fwd Cabin mattress fabric- Sunbrella Navigation Mariner
• Wire for TV in master stateroom and guest cabin.  No TV's

Forward Cabin and Head

• Shoji door to forward cabin
• Add a single ss cup holder behind the forward sink
• Install a corian fiddle outboard in the forward head
• Build a cabinet behind the door to hold a small trash can in head
• Install acrylic divider panels between head and shower
• Delete sliding cabinet doors and build swing doors
• Replace cherry trim in shower with acrylic
• Install second cherry towel rack on inside of door

Master Cabin and Head

• Corian counter with radius and corian undermount sink in master head in lieu of cherry counter and vessel sink w/ vessel faucet.  Add 3" matching corian fiddle behind sink.  Corian counter to be in silver birch.  Corian undermount sink to be Glacier White.
• Add a single ss cup holder behind the master sink
• In the master head delete the sliding cabinet doors and build swing doors like the S45
• Replace cherry trim in master head shower with acrylic

Galley

• Delete the two middle drawers aft of the sink and build one large drawer
• Build a silverware drawer in the top drawer fwd of the galley sink.  Delete the cutting board and corian sink cover
• Add a door on the small cabiet fwd of galley sink. Remove fiddle and leave open inside
• Custom galley layout.  Delete the standard refrigerator.  Install a 2 drawer refrig/refrrig unit in that space.  Install a light and a 120VAC outlet.  Create a cabinet at counter level minimum 15" high
• In the galley below the sold build a flat surfacearea for storage and add fiddles so the storage will not slide.  

Main Salon and Helm

• Custom main salon layout- Utility room hatch in middle of sole.  Delete the port side sliding settee and mates lounge and build a longer settee with end tables with a drawer and a cabinet fore and aft.  Modify pan in the utility room to create landing.
• Install Volvo joystick on STIDD armrest
• Add SS cupholder outboard on the flat starboard of wheel
• Add SS cup holders on each end table on port side
• Add SS cupholder on starboard side by curved window
• Add single ottoman with cherry base and fabric cover
• Build a Sabre 45 style liquor locker in the box below the Stidd seats. Delete the silverware drawer above the liquor drawer
• Install Stidd foot rests as high as possible on helm box
• Notch nav desk cover aft and outboard for opening and for wires to pass through.  no thumbhole
• Delete the std cherry grab rail at the helm
• Increase two std main salon armrests another 4" in height on both settees

Utility room

• In custom utility room (port side) build a cabinet with a wine cooler and an ice maker
• Hanging rod and custom shelving in custom utility room to extend all the way starboard where the washer and dryer would be installed

Deep "V" Planing hull design

14° deadrise at the transom, 23° deadrise amidships.

ISO NPG white gelcoat w/vinylester backup resin.

Bottom, topsides and transom VIP resin infused biaxial E-glass
 with Corecell SAN foam core.

Stringer system biaxial E-glass with foam core.

Resin Infused E-glass swim platform with the molded-in anti-skid
 surtace.

Hull side rubbing strakes.

White PVC rub rail with stainless steel cap.

Painted (Urethane) double boot top. - Gold recessed cove stripe.

ISO NPG Gelcoat

 VIP resin infused biaxial E-glass with balsa core.

Molded-in anti-skid deck surfaces.

Companionway door to port.

Sliding windows in the salon on cabin sides.

Electric opening window in salon aft bulkhead.

Hinged access door to side deck at the helm.

Flush, outward opening, transom door with latch

Anchor locker with slam latch.

Large lazarette/engine room access hatch in cockpit sole with
 compression latches.

Integrated Sure Shade system over cockpit

1 1/4" Diameter type 316 stainless steel perimeter rail system.

(6) 12 Stainless steel cleats: two forward  four mid ship.

(2) Stainless steel bollard cleats aft

(2) Stainless 12" cleats on cockpit coaming on centerline

(1) 10"Stainless steel cleat to starboard of windlass as anchor rode
 tie off.

(4) Custom cast stainless steel mid-rail line chocks.

(2) Custom cast stainless steel skene chocks forward.

Custom stainless steel bow pulpit with dual anchor roller for
 CQR or Delta anchor and "lunch hook."

Ouick anchor windlass, electric rope-chain type.

Teak flag staff and socket on taffrail.

Burgee staff on the bowpulpit

(6) Low Profile stainless steel hatches w/screens.

(6) Custom stainless steel opening port lights.

Teak toe rails.

Teak cabin-side eyebrow.

Teak table in cockpit

Custom cast stainless steel "SABRE" logo.

Raw water wash down system at the bow.

Hinged access door to starboard side deck.

Dual Volvo-Garmin 8617 Multi-Function Displays (MFDs) w/
 Separate SD Card Readers.

Volvo-Penta Autopilot w/ Joystick Driving.

Volvo-Penta IPS Plus Joystick Controller on Stidd Armrest.

Twin Lever Shift & Throttle Control (EVC-E) w/ Single Lever &
 Cruise Control Software.

Triple windshield wipers w/ multiplespeed settings.

Windshield washers plumbed from the fresh water system.

Ritchie Compass.

Switch controls for horn, running lights, anchor light, engine room
 blowers, & bilge pumps.

Custom teak steering wheel w/ tilt helm &Sabre logo.

Twin Stidd N Series helm seats mounted on a cherry cabinet

NMEA 2000 backbone

Twin Volvo-Penta IPS 700 inboard propulsion system, electric shift transmissions & NiBrAl P-series duo-props -Tier III emission certified.

Pleasure craft rated VP D8, 550mhp @, 2900rpm engines.

Integrated fresh water heat exchanger cooling system.

24v-110Amp alternator each engine.

Extra 12v-115 Amp alternator.

Volvo-Penta 900mm Interceptor trim system w/ auto trim.

Dynamic Positioning System (DPS).

Active Corrosion Protection system (ACP).

Volvo-Penta Clear Wake Exhaust bypass system (EVC controlled).

 Groco raw water intake strainers & safety sea valves.

Engine room blower & vent ducts.

Engine room floor with FRP anti-skid.

Gloss white engine room.

Gloss white painted engines.

Mylar-faced foam noise barrier.

(2) 263 USG diesel fuel tanks port and starboard.

Dual Racor fuel filters

(2) 2" "Diesel" deck fill plates.

(4) AGM Group 31 dedicated engine start batteries.

(3) AGM 4D deep cycle ship's service batteries.

(1) AGM Group 24 generator start battery.

Remote control battery switches with controls at helm.

Manual emergency battery crossover switch.

Illuminated main circuit breaker distribution.

Digital battery monitor.

Lighting:
 St. Maarten amber cabin reading lights.
 High output LED lights in the overhead. LED strip lighting in appropriate locations.
 LED engine room lighting.

Tri-color lights over helm station, red, white blue Cockpit courtesy lights.

Marine-grade, tinned wire throughout.

12V DC USB chargers at helm and in all cabins

Onan 13.5 kW generator including:

Onan E series display

Dedicated start battery.

Water drop muffler.

Cooling water intake strainer. Sound shield.

Transfer switch.

50A shore power service with Glendinning Cablemaster & 70ft. cord.

Isolation transformer

Illuminated main circuit breaker distribution panel.

Digital AC system monitor

120V GFCI protected outlets in each cabin and engine room.

50amp, 3-bank battery charger

Reverse cycle heat/air conditioning with 4 zones.

-One 10k BTU inthe forward cabin,

-One 10k BTU in the master cabin

- One 16k BTU in the galley

- One 24k BTU in the main salon.

Island berth athwartship layout with 9" foam mattress and
 aminated trim.

Hull side deadlight over head board

Shoji style passageway and closet doors

Shoji style portlight screen panels

Cherry hull ceilings.

Drawers under berth and in bulkhead aft of berth.

(2) hanging lockers fore and aft of bed

Teak and holly sole.

Sound deadening soft headliner panels.

Sliding door to master head compartment.

Private access from master stateroom

Custom tile in WC and shower sole

High gloss finish over the solid cherry counter.

Vanity cabinet below sink - Storage outboard

Mirror above vanity, cherry framed

Separate shower stall with clear bi-fold enclosure and glass tile
 accent wall within

Electric shower sump pump

Opening port to side deck

Deck hatch with blind/screen overhead

Ventilation blower

Stainless steel towel bars

Spacious island berth, with 6" mattress and laminated trim.

Cherry hull ceilings.

Drawers under berth, A/C return grille beside.

Storage lockers, drawers, and shelves.

Teak and holly sole.

Sound deadening soft headliner panels

Private access to the forward head and shower

Stainless steel under mount sink.

Shower stall with seat and locker outboard.

Hot and cold pressure water

Electric shower sump pump.

Storage lockers.

Solid surface vanity top with bull nose.

Towel bars

Soap dispenser

Cherry wood trimmed mirror over the sink.

Ventilation blower.

Solid surface counter top.

Stainless steel under mount sink with cover and pull-out faucet

Soap dispenser

Isotherm stainless steel stand-up refrigerator (top) and freezer

Touch control induction cooktop

Convection microwave with stainless steel face

Drawers and storage lockers below the counter.

Built-in waste basket.

Recycle bin below steps.