|Model:||Channel Cutter 28|
|Number of Engines:||1|
A Bristol Channel Cutter is a work of art and if you appreciate fine art and craftsmanship, you will find the interior of the BCC Itchen to be a temple. As you probably already know, the BCC has the most pleasing and functional layout you will ever find on a 28 foot boat. Recognized in Ferenc Mate’s Best Boats, all three issues for all the right reasons. The Sam L. Morse builder is famous for the highest quality of construction that equals the style, the grace, and the pure function that Lyle Hess sought to achieve. It is this attention to every detail that makes the Lyle Hess-designed Bristol Channel Cutter stand out from the rest. As you enter the companionway, the large, workable galley is to port, the chart table/nav station to starboard, and the ideally sized salon forward with a cozy heater built-in on a tiled corner shelf. The double berth pulls out on the port side creating a comfortable sleeping arrangement for two. The dinette is formed from the settee to port with a beautiful table. The starboard settee is also a comfortable sea berth with lee cloths for offshore security.. In addition, the Quarter Berth aft on the port side is a great sea berth, but also provides amazing storage. The forward cabin is designed as the head, dressing room, workshop, walk-in closet, and access to the sail locker forward. The interior of a BCC is a place you just want to sit and contemplate the magic of this world. It is so beautiful, you are happy just sitting, reading, resting, and rejuvenating.
The BCC galley is to port, right when you walk down the companionway stairs. It is incredibly well designed and totally workable. The Force Ten propane stove is a two-burner stove with and oven. The storage on a BCC rivals that of any forty foot boat. There are cabinets are outboard, a huge dry storage locker to the left of the stove and another to the right. The counter space is also amazing! There is the full hinged top of a large refrigerator which is on starboard and creates the stand-up nav station. The famous hinged counter connects to the port side to make the galley extend across the boat!
The BCC has very special Nav station arrangement in the main salon with the SSB right there and space to spread out ocean charts. All of the electronics for proper offshore voyaging are professionally installed and integrated with the display mounted on a swing out arm at the companionway in easy viewing of the cockpit. There is a large chart table and famous BCC chart locker above the Quarter berth. There is also good shelving for books and equipment manuals.
Maybe you are an excellent experienced sailor looking to downsize to a vessel that is elegant and simple or maybe you are a first boat owner a little intimidated by the systems. Fear not. You can relax knowing that the BCC is the most simple and functional vessel you can find. This vessel is designed to be simple, easy to maintain, easy to fix, and comfortable and safe to sail far. All the systems are engineered to the form, fit and function to which she is designed. Start with the diesel engine. Itchen has a Yanmar 3GM30 27 HP diesel with fewer than 3000 hours on it. In 2016 the Yanmar received a major maintenance at Deaton’s in North Carolina with a complete inspection, new raw water pump, new seacock, anti-siphon loop, wet exhaust and exhaust elbow. The owner has maintained the engine well and it works perfectly. The engine is fuel tank is a 35-gal aluminum tank plus a compliment of jerry jugs giving her a 500 mile range which is totally respectable in any sailing vessel. The diesel pushes the boat at 5-6 knots and burns about a .7 gallon per hour.
AC Shore Power:
Despite her modest length on deck and 14000-lb displacement, the BCC surprisingly fast with her true cutter rig and bow sprit providing a tight sheeting angle. While the theoretical hull speed 6.9 knots, we've surfed along at over 7 knots often. You can plan on 135 mile days, and reports of 150 mile days are not infrequent. She has the water line (26’3”) and the sail area (690 sq ft) to keep up with much larger boats! And maybe even more importantly, she gets a safety factor of 10 on a scale of 1-10 and she'll always be comfortable well behaved in rough weather.
Itchen’s rig is the standard BCC overbuilt rig. The Forespar double spreader mast and boom were pulled and painted during the 2002 refit Itchen has been well maintained. The keel stepped mast is Forespar aluminum with a double spreader. It has mast steps built in which is a great feature as it makes it easy to inspect the rigging regularly and maintain the mast and hardware in good condition. The rigging has been frequently inspected and maintained. The mast was pulled and painted in 2003. In 2013 she had a complete rigging inspection with stays replaced and indicated. In 2018 and 2019 the whisker stays and boomkin stays and chain plates where replaced. Itchen has nice reefing tackle on the boom as well as roller reefing headsail. The line stoppers were all maintained so all runs smoothly. She has a very nice downwind pole with a track for ease of handling by one person and a nice newish (1997) . Everything about this boat spells quality. The shrouds attach to overbuilt stainless steel chain plates that wrap around the yacht's beam.
The BCC is an incredible yacht to look at and even more incredible to contemplate the build and design. Itchen is hull #73 built by Sam L. Morse in Costa Mesa CA. She is completely factory finished to the high standards of the Sam L. Morse factory. The hull is solid fiberglass, hand-laid by skilled craftsmen. The results are beautiful. The deck and cabin top are marine plywood and hand laid fiberglass an inch thick. Her topsides were awlgripped hull in 1997. She's the standard cream BCC with an off white deck and dark green cove and boot stripes. Her sunbrella canvas completes the picture with a dodger and bimini new in 2017 as well as the sail covers, hatch covers, and tiller cozy. The windlass has been refurbished! The bottom is well maintained. The woodwork has been professionally refinished about two years ago and is in lovely condition. The bronze opening ports are real and salty.
Like all BCC, Itchen's side decks are very wide, 2.5 feet in one spot. The eight-inch bulwarks ensure safety like a baby's cradle. You feel really comfortable working or playing on deck. The bulwarks are beautiful, constructed by solid mahogany planks slightly raised off the deck, supported by massive posts on 20 inch centers. This means the entire deck is a scupper, guaranteeing you quick drainage in any sea. The entire top of the little forward doghouse opens, making passing sails, an easy job. The forward cabin and roomy forepepkcabin is designed so that you can easily pass sails up or down. The cockpit is comfortable, safe and with good coamings around, making for a good back rest. Massive Samson posts support the mooring lines and make her a little ship
The Bristol Channel Cutter was built by Sam L. Morse Company in Costa Mesa California for about 40 years. The last three or four that rolled out of the factory cost over 300K. The mold is now owned by the Cape George Marine in Port Townsend and a new BCC will be over 350K with very little equipment. Luckily there are still a few really really good BCCs out there and you can own this lovely vessel yourself. We have owned two BCCs and we have sailed dozens of them. We have actually sold 166 BCCs and each time that I spot one at anchor, under sail, tied up to some dock in Alaska, or even sitting in some barn in New Hampshire the sight still gives me a thrill. Several years ago we went to England to Cornwall and we saw many real channel cutters; the real ones and I can tell you this Bristol Channel Cutter is the real thing…just not all wood. This boat is real.
The BCC is a traditional full keel, true cutter, with the prettiest underbody I've ever seen. Her displacement weight is 14,000 lbs. She’s 28 feet on deck, she is about 38 overall with her bowsprit and boomkin. You cannot compare the BCC to other 28 footers with her long waterline of 26’3’ gained from her plumb bow and straight transom. The BCC is surprisingly fast, especially off the wind. While her theoretical hull speed is an impressive 6.9 knots, we have seen 7+ knots many, many times. We plan on 125 mile days and those 150 mile days do happen.
HULL: The hull is hand laid using multiple layers of fiberglass cloth and resin. Thickness varies from nearly an inch on centerline to about 3/8-inch at the deck edge. The deck and cabin structure are a sandwich construction utilizing marine grade plywood rather than balsa core. The hull and deck are joined on an inward flange, bolted on six-inch centers and sealed with 3M 5200 adhesive sealant. There are no prefabricated liners used so the entire interior built into the boat like fine furniture and tabbed to the bulkheads and hull sides to strength the entire structure. The construction makes the BCC a very, very strong and well-built boat. There are 126 of these cruising the globe and many are more than 30 years old.
RUDDER: The rudder is a massive external rudder that makes the boat track well and steer with the wind vane and heave to. The rudder on Rogue is the new improved Sam L. Morse rudder with solid glass construction in all the areas where hardware is attached.
DECK: The BCC has parallel cabin sides, the side decks are astoundingly broad-2.5 feet in one spot, which with the very high 8 inch bulwarks, make for comfortable and safe cradle for working on deck or hanging out. The bulwarks are beautiful, constructed by solid planks slightly raised off the deck, supported by massive teak posts on 20 inch centers. This means the entire deck is a scupper, ensuring quick drainage in any sea. The entire top of the little forward doghouse opens, making passing sails, an easy job. The cockpit is comfortable, safe and with good combings around, making for a good back rest. Glasswork is done by the same folks that built all the Westsail, Crystaliner, who have over 25 years of experience in building world cruising fiberglass sailing vessels. The results are beautiful. Massive Samson posts support the mooring lines and make her a little ship.